AMX-220FX USB - 8 mono inputs with gold plated XLR and balanced TRS jack
Mic/line inputs with TRIM, 48V Phantom Power and low cut filter @75Hz-18dB/Oct.
EQ: 3-band fixed EQ
3-band EQ with sweepable MID
MONO/STEREO CHANNEL (AMX-140FX USB & AMX-180FX USB only)
MIC input with TRIM, 48V Phantom (low cut filter @75Hz-18dB/Oct. on AMX-180FX USB)
Two line inputs with 2 TRS balanced input jacks, mono on left jack only
3-band fixed EQ
STEREO CHANNELS
2 TRS balanced input jacks each channel, mono on left jack only, with GAIN switch
AMX-220FX USB - 4 stereo channel with 4-band EQ
COMMON FEATURES FOR ALL INPUT CHANNELS
2 AUX sends:
AUX 1 PRE-FADER, for monitoring
AUX 2 POST-FADER, for effects sends
Peak LED on each input channel
COMMON FEATURES
AUX 1 with PRE-/POST-FADER switch for monitoring/effects operation
MUTE/ALT3-4, and SOLO switches and LEDs
Two different ways of SOLO PFL (Pre-fade listen) AFL (After-fade listen) for a
better control over signal path
Matrix (MAIN MIX / 1-2 / 3-4) & discrete output level for Phones/Control Room
MASTER SECTION
2 Stereo AUX return with level and routing to AUX 1
2-track IN/OUT with level and discrete switches for routing to Control Room and to Main Mix
24-bit internal DSP with 256 effects (16 presets by 16 variations), DSP MUTE and Peak LED.
ANALOGUE INSERTS & OUTPUTS
AMX-220FX USB - 8 insert (mono channels) MAIN MIX & ALT 3-4 outputs
USB SECTION
Recording/overdubbing can be achieved by selecting input channels 1-2 or L+{R
MAIN MIX output signals
Playback can be achieved by selecting MAIN MIX or HIGHER NUMBERED stereo
channel ( CH15/16 for AMX-220FX USB)
By selecting the HIGHER NUMBERED stereo channel you can easily
adjust the desired monitoring & fx levels for each
overdubbing musician!
PHYSICAL SPECS - Dimensions (W×D×H) and Weight
AMX-220FX USB:
427×412×35/48mm (16.8"×16.2"×1.4/1.9"); 5.9kg (13 lb) |
