CAD DMPT7 - SEVEN-PIECE DRUM MIC TOURING PACK

DMTP7
Seven-piece Drum Mic Touring Pack
Contains three TM211s, two CM217s, one SN210, and one KM212 in protective travel case.

3 x TM211 - Cardioid Dynamic Microphone
Designed for toms. The built in rim clip eases setup and adjustment. Sold only in DMTP packs.

Applications Brass, Guitar Cabinets, Bass Cabinets, Snare Drum, Rack/Floor Toms.

TM211 Specifications Operating Principle:     Moving coil dynamic Polar Pattern:     Cardioid Frequency Response:     90Hz to 13KHz Sensitivity:     -53dBV (2.2mV) @ 1 Pa Impedance:     560 ohms

2 x CM217 - Cardioid Condenser Microphone
Designed for drum overheads. Features include hi-pass filter and attenuator. Mic clip included. Sold only in DMTP packs.

Applications Acoustic Instrument, Strings, Cymbals/Overheads, Hi-hat.

CM217 Specifications Operating Principle:     Condenser Polar Pattern:     Cardioid Frequency Response:     40Hz to 13KHz Sensitivity:     -41dBV (8.9mV) @ 1 Pa Impedance:     230 ohms Hi-pass Filter:     200Hz, 6dB/oct Attenuator:     10dB Power Requirements:     P12, P24, P48, 11mA(P48)

1 x SN210 - Supercardioid Dynamic Microphone
Designed for snare drums. The built in rim clip eases setup and adjustment. Sold only in DMTP packs.

Applications Brass, Guitar Cabinets, Bass Cabinets, Snare Drum.

SN210 Specifications Operating Principle:     Moving coil dynamic Polar Pattern:     Supercardioid Frequency Response:     90Hz to 14KHz Sensitivity:     -56dBV (1.6mV) @ 1 Pa Impedance:     300 ohms

1 x KM212 - Cardioid Dynamic Microphone
Dialed in at the factory for the thump and crack of your kick drum. Try it on the bass rig too. The included mic clip provides additional isolation. Sold only in DMTP packs.

Applications Bass Cabinets, Kick Drum, Rack/Floor Toms.

KM212 Specifications Operating Principle:     Moving coil dynamic Polar Pattern:     Cardioid Frequency Response:     50Hz to 16KHz Sensitivity:     -66dBV (0.5mV) @ 1 Pa Impedance:     60 ohms