The BX10s active subwoofer is ideal for any monitoring environment requiring an accurate low-frequency response down to 20Hz. Comprising a 10” composite driver, 240-watt internal amplifier, and a variable 50 to 200Hz crossover, the BX10s delivers tight, clean bass in a compact chassis—perfect for project studios where space is often at a premium. The BX10s is suited perfectly for either two-channel stereo or multichannel surround monitoring environments and is designed to integrate with any powered direct-field studio monitors, including the M-Audio BX5a and BX8a active reference monitors. The BX10s even includes a subwoofer bypass function so you can judge how a mix will sound without a dedicated subwoofer—controllable via the included sustain pedal.
Full Features
10” composite driver
240-watt amplifier
rear bass-reflex port
variable 50-200Hz crossover with easy settings for Dolby Digital®, DTS® and THX® compliance
low frequency response down to 20Hz
adjustable gain (-30dB to +6dB)
balanced XLR and ¼” TRS inputs and outputs
subwoofer bypass function with ¼” footswitch input
auto on/off “sleep” function
phase switch (0/180 degrees)
video shielding for use near CRTs
removable grill
removable feet
Specifications
Type: bass-reflex active powered subwoofer
Woofer Driver: 10-inch composite (treated paper/fiberglass) cone with high-temperature voice coil and damped rubber surround
Frequency Response: 20Hz - 200Hz (-3dB points)
Crossover: HP/LP linked filter sweepable from 50 - 200Hz; 24dB/octave 4th-order alignment
Input Sensitivity: 85mV pink noise input produces 100dBA output SPL at one meter with volume control at maximum
Amplifier: 240 watts average power into 8 Ohms, discrete transistor design
Signal-to-Noise Ratio: 86dB (A-weighted)
THD at Rated Power, Mono Mode: 0.019% (175 W)
Inputs: two XLR balanced inputs; two TRS balanced/unbalanced inputs
Outputs: two XLR balanced outputs for satellites; two TRS balanced/unbalanced outputs for satellites
Controls: volume/gain control, 10dB bass boost switch, sleep mode switch, phase inverse switch, variable crossover control, subwoofer bypass footswitch jack
Input Impedance: 20k ohms balanced, 10k ohms unbalanced
Maximum Input Level: +20dBU
Auto Turn Off Time: 15 minutes
Auto Turn On Input Sensitivity: 7.3 mV
Protection: over temperature, turn-on/off transient, subsonic filter, external mains fuse, DC protection, over current protection
Indicator: power on (blue) or standby/bypass (red)
Power Requirements: dual-voltage (selectable by rear-panel switch) for either 100-120V/~50/60Hz or 220-240V/~50/60Hz; powered via detachable grounded IEC cable
Cabinet: vinyl-laminated MDF
Dimensions: 15 in. (h) x 15 in. (w) x 15 in. (d); 38.1 cm (h) x 38.1 cm (w) x 38.1 cm (d)
Shipping Weight: 54.6 lbs.; 24.75 kg |
|